The LiteJet System can be programmed from either the Touch Panel Programmer (TPP) or from a PC using the LiteJet Programming Software.
Programming the LiteJet through a PC is simple and can be picked up rather quickly with practice. To program a LiteJet with a PC, 4 things are vital to have prior to leaving for the job site.
These include:
1. A computer with a free serial port. If your computer does not have a serial port,then a USB to serial adapter can be used.
2. The latest version of the Programming Software
3. A straight through serial cable. The serial cable can be bought or made. If made, the only pins you will need are 2, 3, and 5.
4. Finally, you will need a LiteJet Master Control Panel (MCP).
Comments